VisualizationLarge Skincare Organizer SVG, Deep Cream Jar Tray Laser Cut File, Bathroom Vanity Mask Holder DXF
A large, deep skincare organizer with an open back row for sheet masks and serums and three wide front cells for cream jars and pads, available as SVG and DXF in separate versions for 3, 4, 5 and 6 mm plywood. It measures 340 × 230 × 100 mm (13.39 × 9.06 × 3.94 in), has 8 pieces, and slopes from the back wall to a 55 mm front. Tabs and slots hold it together, and it is free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 340 × 230 × 100 mm (13.39 × 9.06 × 3.94 in)
- Parts
- 8
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,160 × 342 mm
- Cut length
- 6.57 m
- Est. time, 10 W diode (3 mm)
- 21 min 54 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 08 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the file for your plywood thickness, split the 1160 mm layout over two sheets if needed, and cut a test slot.
- 02Cut the 8 parts: front, back, two sloped sides, the deep base, the long cross divider and two short dividers.
- 03Set the two short dividers in the base, lay the cross divider over them, then attach the back, both sides and the front.
- 04Sand, seal against bathroom moisture, then stand masks and serums along the back and put jars and pads in the front cells.
Roomier version of the mask-row layout
This is the larger of two trays in the set that share one idea: an undivided back row and three cells in front. Here the base is 340 × 230 mm, so the back row is deep enough for several sheet masks plus a pair of dropper bottles, and the three front cells are each wide enough for a 50 ml jar with space to grab it.
In the photo, on a beige marble bathroom counter against a sage-green wall, the back row holds sheet masks with a green leaf print and two gold and black serums. The front cells keep a white cream jar, a pink jar and a tall stack of cotton pads.
Laser setup
Pick the SVG or DXF for 3, 4, 5 or 6 mm plywood; the slots are drawn for that exact sheet. The 3 mm layout is 1160 × 342 mm, which is longer than most diode beds, so split it: the base, front and back on one sheet, the sides, cross divider and two short dividers on another. For the 3 mm file allow about 21 min 54 s on a 10 W diode, about 9 min 08 s on a 40 W CO2 and about 4 min 23 s on a 100 W CO2. A diode needs several passes for 5 or 6 mm.
Assembly and care
Press the two short dividers into the front part of the base, drop the long cross divider over them, then add the back, the sides and the front. It holds without glue; a little wood glue makes it permanent. Since it sits on a bathroom counter, seal every face with water-based polyurethane.
List it next to the 320 × 210 mm version as a size option, or cut both as a his-and-hers pair.
Questions about this file
How much bigger is it than the mid-size mask-row tray?
It is 340 × 230 mm instead of 320 × 210 mm, so both the back row and the three front cells have more room.
Will it fit inside a bathroom cabinet?
It needs a shelf at least 230 mm deep and 100 mm of height for the back wall.
What thickness is best for a large tray?
4 or 5 mm plywood keeps the long walls rigid; 3 mm is fine if you add glue to the joints.
How do I seal it against water?
Sand, then brush two thin coats of water-based polyurethane on all faces, including the cut edges and the base underside.
Can I add a monogram?
Yes, place an engraving on the front panel in your software before cutting; the file has cut lines only.
Similar files
