VisualizationSlim Period Organizer SVG, Narrow Shelf Pad and Tampon Holder, Five Slot Laser Cut Box DXF
A slim five-slot period organizer, only 120 mm deep, for narrow bathroom shelves and windowsills. Files are SVG and DXF in versions for 3, 4, 5 and 6 mm plywood; the box is 420 × 120 × 120 mm (16.54 × 4.72 × 4.72 in), made from 9 tab-and-slot parts, with five equal slots in a single row and a sloped front. The download is free of charge.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 420 × 120 × 120 mm (16.54 × 4.72 × 4.72 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,648 × 252 mm
- Cut length
- 6.48 m
- Est. time, 10 W diode (3 mm)
- 21 min 37 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 00 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Check that your laser bed takes a 420 mm part, then open the file for your plywood thickness and cut one slot test.
- 02Cut the 9 parts; the four square dividers are interchangeable.
- 03Slide the four dividers into the base, fit the back, add the two sloped side panels and press the low front on last.
- 04Sand the top edges, seal, and stand pads, liners, tampons and wipes on edge in the five slots.
Built for a narrow shelf
With a depth of 120 mm and a length of 420 mm, this is the slimmest box in the set. Four dividers split it into five slots in one row, and products stand on edge so you see each wrapper. Left to right in the photo you see pink day pads, lilac pads, dotted liners, tampons standing upright and a stack of wipes. Since the box is as deep as it is tall, it fits on a narrow ledge above the sink, on a radiator shelf or in a shallow mirror cabinet without hanging over the edge.
Cutting the long pieces
Front, back and base are all 420 mm long, which is the main thing to plan for. The 3 mm layout is 1648 × 252 mm, so rearrange it over two or three sheets; the bed still has to take 420 mm in one direction, or the long panels would have to be redrawn in two parts. Laser time for the 3 mm file: about 21 min 37 s with a 10 W diode, about 9 min 00 s with a 40 W CO2, about 4 min 19 s with a 100 W CO2. The four dividers are identical 120 × 120 mm squares, so assembly is simple.
Selling and gifting
The narrow shape is the selling point: list it for small bathrooms, RVs, boats and studio flats. Offer it in natural oil or a soft white stain, and suggest a matching slim tray for toothbrushes. A personalised version with an engraved name across the front makes a neat gift for a roommate.
Questions about this file
How narrow is it?
The box is 120 mm (4.72 in) deep, so it fits a shelf or ledge about the width of a hand.
Will my laser bed fit the 420 mm parts?
Front, back and base are 420 mm long. Beds smaller than that will need the panels split and joined, which is extra design work.
Do products stand upright in the slots?
Yes, folded pads and liners stand on edge and tampons stand on end, as in the photo, so all five slots are visible at once.
Can I cut it from 6 mm plywood?
There is a 6 mm file. It gives a very sturdy box but needs a CO2 laser or many diode passes.
Is there room for an engraved name?
Yes, the 420 mm front has plenty of space for a name or a word. Add it as an engrave layer, since the file contains cut lines only.
Similar files
