Three Tier Pad Organizer SVG, Stepped Bathroom Shelf for Tampons, Wooden Period Storage Laser DXF

Three tiers from back to front

This box has the lowest front in the set, just 44 mm, and two full-length cross dividers that step up toward the 110 mm back (60 mm, then 80.2 mm). That gives three rows, each one higher than the one in front. The top row is split by one tall divider into two pad bays, side by side. The middle row has a short divider: liners on the left, tampons lying in a line on the right. The front row is one long open tray, wide enough for a pack of wipes lying flat. Everything faces you, like a small stepped shelf.

Laser settings and sheet size

The 9 parts include two cross dividers of different heights, so mark them as you unload the bed. The 3 mm file takes about 24 min 42 s on a 10 W diode, about 10 min 17 s on a 40 W CO2 and about 4 min 56 s on a 100 W CO2. Cut 3 mm on a diode in one or two passes; for 5 or 6 mm use a CO2 or slow multi-pass settings with air assist. The 3 mm layout is 1212 × 342 mm, so most users split it over two sheets.

Finishing

Sand the stepped top edges, because hands brush them every time you reach in. A clear satin lacquer suits a bathroom, while a white-wash stain looks good in a bright room. As a product, sell it as a "bathroom stair shelf", or stocked with a postpartum or period kit.