VisualizationCotton Pad Holder SVG, Skincare Cream Tray Laser Cut File, Three Section Vanity Organizer DXF, Mask Stand
A skincare tray with two back bays for creams, serums and sheet masks and a long front row for cotton pad stacks, available as SVG and DXF with separate files for 3, 4, 5 and 6 mm plywood. It measures 300 × 210 × 100 mm (11.81 × 8.27 × 3.94 in), has 7 pieces and three compartments, and slopes from the back to a 55 mm front. It is joined with tabs and slots and is free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 300 × 210 × 100 mm (11.81 × 8.27 × 3.94 in)
- Parts
- 7
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,040 × 322 mm
- Cut length
- 5.59 m
- Est. time, 10 W diode (3 mm)
- 18 min 38 s
- Est. time, 40 W CO2 (3 mm)
- 7 min 46 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Download the file for your sheet thickness and cut one slot from an offcut to check the fit.
- 02Cut the 7 parts: front, back, two sloped sides, base, the cross divider and the short back divider.
- 03Seat the back divider and the cross divider in the base, then fit the back wall, both sides and the low front.
- 04Sand and finish, then put three pad stacks in the front row and creams, serums and masks in the two back bays.
Three compartments, one for pads
Cotton pads are the thing most skincare boxes squeeze into a corner. Here they get the whole front row: a cross divider spans the full 300 mm width, and the low row in front of it holds three stacks of round pads side by side. Behind the cross divider, one full-height divider makes two back bays.
In the photo the left back bay holds a large and a small cream jar with a gold-capped serum, and the right bay keeps a fan of sheet masks, including one printed with a face. It sits on a light vanity with a round mirror and a cup of makeup brushes. With only three compartments, it is easy to keep tidy.
Cutting
The download has an SVG and a DXF for 3, 4, 5 and 6 mm plywood, each with slots matched to that sheet. The 3 mm layout measures 1040 × 322 mm; on a smaller bed, cut the base on a separate sheet from the walls. The 3 mm file cuts in about 18 min 38 s on a 10 W diode, about 7 min 46 s on a 40 W CO2 and about 3 min 44 s on a 100 W CO2. Thicker plywood needs a CO2 or several diode passes.
Assemble by setting the back divider and the cross divider into the base, then adding the back, the two sloped sides and the front.
Ideas for selling and gifting
Pair the tray with three packs of reusable bamboo pads and a cleanser for a zero-waste gift. Spa and facial studios use a box like this at the treatment station, so it is worth offering a batch price. A lightly stained finish hides cream marks better than raw birch.
Questions about this file
How many cotton pad stacks fit in front?
The front row spans the full 300 mm width and holds three standard round pad stacks side by side, as in the photo.
Can I use it with reusable pads?
Yes, washable bamboo or cotton rounds fit the front row just as well as disposable ones.
Which thickness should I choose for a spa?
For daily professional use, 4 or 5 mm plywood with a sealed finish lasts longer than 3 mm.
Will acrylic work for a spa version?
Yes, choose the file for your acrylic thickness, test a slot, and bond joints with acrylic cement if needed.
Is glue needed?
No, the joints hold dry. Use wood glue only if you want a permanent box.
Similar files
