VisualizationKitchen Storage Box SVG, Wide Pantry Organizer DXF, Napkin and Spice Jar Caddy Laser Cut File, Countertop Box
This laser cut file makes a wide kitchen storage box with seven sections: one full-depth bay on the left for napkins or tea, and six smaller bays in two rows of three for jars and small supplies, all behind a sloped front. It includes SVG and DXF files for 3, 4, 5 and 6 mm plywood, an outer size of 380 × 240 × 100 mm (14.96 × 9.45 × 3.94 in) and 11 pieces that assemble with tabs and slots. Its SVG and DXF files are free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 380 × 240 × 100 mm (14.96 × 9.45 × 3.94 in)
- Parts
- 11
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,361 × 352 mm
- Cut length
- 8.34 m
- Est. time, 10 W diode (3 mm)
- 27 min 48 s
- Est. time, 40 W CO2 (3 mm)
- 11 min 35 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Pick the file that matches your plywood and cut one test slot; a tab should go in with light pressure.
- 02Cut the eleven pieces: front, back, two sloped sides, base, the long divider, the cross divider and four short dividers in two heights.
- 03Assemble the walls on the base, fit the long divider and the cross divider, then add the tall pair at the back and the low pair at the front.
- 04Sand, coat with lacquer or oil, and put napkins and tea in the big bay and jars and small items in the six small bays.
One big bay, six small ones
A long divider sets off a full-depth bay on the left of this 380 mm box. In the photo it holds a tall stack of paper napkins standing at the back with a fan of tea bags in front of them. The rest of the box is divided by a cross divider and four short dividers into two rows of three. The back row holds three spice jars with peppercorns, dried herbs and pink salt; the front row holds a natural scrubbing pad, a pack of toothpicks and a roll of red and white baker's twine. The back wall is 100 mm and the front 50 mm.
Choosing the thickness
The four thickness versions all have the same outer size. Three millimeter is the quickest: about 27 min 48 s on a 10 W diode, about 11 min 35 s on a 40 W CO2 and about 5 min 34 s on a 100 W CO2, for the 3 mm file. A 10 W diode needs one or two passes for 3 mm, and 5–6 mm calls for a CO2 or many passes. The 3 mm layout is 1360.6 × 352 mm, so desktop machines will need it split across two or three sheets.
Assembly
Fit the long left divider and the cross divider first. The four short dividers come in two pairs: the taller pair belongs in the back row and the lower pair in the front. Glue is optional. Sand the edges, then wipe on lacquer or oil.
Ideas: sell it as a napkin and spice caddy for a dining table or buffet, a breakfast station box, or fill it as a gift with tea, jars and twine.
Questions about this file
Can standard paper napkins stand in the big bay?
Yes, folded napkins stand upright in the full-depth left bay, as in the photo, with room for tea bags in front.
Can I use it on a dining table?
Yes, it works as a table caddy for napkins, salt, pepper and toothpicks. Sand it smooth so it does not scratch the table.
How do I scale it without ruining the joints?
Scale the drawing, then set every slot back to your plywood thickness, because scaling changes the slot width as well.
Is MDF OK for this box?
MDF works for a dry kitchen box. Use the file for its thickness and paint or seal it so it does not mark.
Can I engrave a family name on the front?
The file has no engraving, but the 380 mm front panel has room for a name if you add an engraving layer yourself.
Similar files
