VisualizationFeminine Hygiene Organizer SVG, Eight Slot Tampon and Pad Tray, Large Bathroom Storage Laser DXF
A large feminine hygiene organizer with eight slots in two rows of four, for pads in several sizes, tampons, liners and wipes. It comes as SVG and DXF for 3, 4, 5 and 6 mm plywood, measures 380 × 200 × 110 mm (14.96 × 7.87 × 4.33 in), and is assembled from 12 tab-and-slot parts with a sloped front. The download is free.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 380 × 200 × 110 mm (14.96 × 7.87 × 4.33 in)
- Parts
- 12
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,396 × 322 mm
- Cut length
- 8.62 m
- Est. time, 10 W diode (3 mm)
- 28 min 44 s
- Est. time, 40 W CO2 (3 mm)
- 11 min 58 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the plywood thickness file, cut a test slot on scrap and adjust until the tab goes in with light pressure.
- 02Cut the 12 parts and keep the three lower front dividers apart from the three taller back dividers.
- 03Fit the cross divider into the base, add the three tall dividers behind it and the three lower ones in front, then put on the back, sides and low front.
- 04Sand, seal against moisture and fill the eight slots column by column, one product type per column.
Eight slots for a full rotation
A full-length cross divider and six short dividers make a 4×2 grid, the most compartments of any long box in this group. In the photo each column holds one type twice: overnight pads on the left, tampons in two sizes next, liners in the third column and a pad-and-wipes pairing on the right. That lets you keep light and heavy versions of the same product side by side. The front row sits behind a 61 mm wall and the back row rises to 110 mm.
Cutting the twelve parts
The pieces are front, back, two sloped sides, base, the cross divider, three front-row dividers (101.5 × 85.1 mm) and three back-row dividers (98.5 × 110 mm). They look alike, so keep the two groups separate. The 3 mm layout is 1396 × 322 mm; on a hobby bed, nest the box panels on one or two sheets and the seven dividers together on the last one. Cutting the 3 mm file of this eight-slot grid takes about 28 min 44 s with a 10 W diode, about 11 min 58 s with a 40 W CO2 and about 5 min 45 s with a 100 W CO2. Thicker files need slower settings or more passes.
Who buys this
Families with teenagers, shared flats, and workplaces that offer free supplies all need room for more than one product. Offer the box stocked for a restroom, as a wedding-day bathroom basket, or plain in a natural oil finish. A matching small two-slot caddy for a handbag drawer makes an easy add-on sale.
Questions about this file
What can I store in eight slots?
Day and night pads, two tampon sizes, panty liners, wipes and spare underwear liners, with room left for a heat patch or pain relief.
Are the front and back dividers the same?
No. Front-row dividers are 101.5 × 85.1 mm and back-row dividers 98.5 × 110 mm, so sort them before assembly.
Can a 10 W diode cut 5 mm plywood for this box?
It can with several passes and good air assist, but the long cut line adds up. 3 or 4 mm is more practical on a diode.
Should the slots be glued?
The grid is self-locking. Glue only the base joints if the box will be lifted full every day.
How do I finish it for a humid bathroom?
Two coats of clear water-based lacquer or a hardwood oil, inside the slots too, keep the plywood from swelling.
Similar files
