VisualizationSauce Bottle Organizer SVG, Stepped Condiment Rack Laser Cut File, Tiered Spice Jar and Bottle Holder DXF
A stepped organizer with one deep full-depth bay for tall sauce and oil bottles and three tiered rows for jars and shakers, four compartments in total. The download includes SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box is 280 × 200 × 100 mm (11.02 × 7.87 × 3.94 in), has 8 pieces and a front sloping down to 60 mm, and assembles with tabs and slots. Free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 280 × 200 × 100 mm (11.02 × 7.87 × 3.94 in)
- Parts
- 8
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 980 × 312 mm
- Cut length
- 5.78 m
- Est. time, 10 W diode (3 mm)
- 19 min 16 s
- Est. time, 40 W CO2 (3 mm)
- 8 min 02 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the file for your plywood (3, 4, 5 or 6 mm) and check the tab fit on one test slot.
- 02Cut all 8 parts and tell the two cross dividers apart by height: the taller one goes at the back of the steps.
- 03Assemble the base, back, sides and front, add the full-depth divider, then the taller cross divider and finally the lower one.
- 04Sand, oil, and stand bottles in the deep bay and jars on the three steps.
Bottles on one side, steps on the other
The left half of this organizer is one deep bay that runs front to back, where tall bottles can stand in a cluster: a ketchup, a hot sauce, balsamic vinegar and olive oil in the photo. The right half is where it gets interesting. Two cross dividers of different heights, about 73 and 86 mm, turn it into three small rows that rise toward the back like stairs.
In the picture the top step holds two jars of chili flakes and dried herbs, the middle step a salt and pepper pair, and the bottom step two short jars of mustard and a sauce. Because each row is lower than the one behind, the lids of all six jars are visible at once.
Laser notes
The 8 parts are front, back, two sides, base, the full-depth divider and the two stepped cross dividers. The 3 mm layout is 980 × 312 mm; split it across two sheets if your bed is under a metre long. A 10 W diode needs about 19 min 16 s for the 3 mm file, a 40 W CO2 about 8 min 02 s and a 100 W CO2 about 3 min 51 s. For 5 or 6 mm, expect several passes on a diode.
Use 4 mm for a balanced weight. The stepped cross dividers only carry small jars, so even 3 mm is fine if your bottles are plastic.
Finishing and gifts
Sand, then seal with a food-safe oil. A stepped rack like this is a nice gift for someone who keeps hot sauces: fill the deep bay with bottles and the steps with jars of homemade chili paste. Etsy buyers search for tiered racks, so mention the steps in your listing.
Questions about this file
How many jars fit on the steps?
Each of the three steps holds two small jars or shakers, so six in total, next to four or five bottles in the deep bay.
Can I use it for hot sauce collections?
Yes, the deep bay takes the tall bottles and the steps suit short 150 ml hot sauce jars and dropper bottles.
What material besides plywood works?
MDF or acrylic of 3 to 6 mm work with the matching file; seal MDF so spills do not swell it.
Should I glue the steps?
They hold by tabs alone. Glue them if you plan to wash the organizer often, since wet plywood loosens joints.
Can I scale it down for a spice drawer?
You can reduce the size, but redraw the slots at your material thickness afterwards or the tabs will not fit.
Similar files
