VisualizationCondiment Station SVG, Eight Compartment Bottle and Shaker Organizer Laser Cut File, Wooden Spice and Sauce Tray DXF
A condiment station with eight compartments in two rows of four: one bottle per back cell and one spice shaker or jar per front cell. The download has SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box measures 340 × 200 × 90 mm (13.39 × 7.87 × 3.54 in), uses 12 pieces, has sides sloping down to a 54 mm front, and assembles with tabs and slots. The download is free.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 340 × 200 × 90 mm (13.39 × 7.87 × 3.54 in)
- Parts
- 12
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,316 × 302 mm
- Cut length
- 7.91 m
- Est. time, 10 W diode (3 mm)
- 26 min 22 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 59 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Pick the SVG or DXF for your exact sheet thickness and cut one test slot to dial in the fit.
- 02Cut all 12 parts and separate the three shorter front dividers from the three taller back dividers.
- 03Assemble base, back, sides and front, place the long cross divider, then fill in the three back dividers and the three front dividers.
- 04Lightly sand, finish with hard wax oil or lacquer, and pair each back bottle with a front shaker.
One bottle, one cell
This station has the most compartments of the condiment boxes: eight cells, four at the back and four in front, each about 80 mm wide. It is the layout for people who like every item to have its own spot. The photo shows a back row of olive oil, balsamic vinegar, ketchup and a honey mustard bottle, with the matching front row of salt, black pepper, dried herbs and chili flakes, so each sauce sits behind the seasoning you would use with it.
The box is a bit lower than its neighbours, 90 mm at the back and 54 mm at the front, which keeps the whole station compact on a counter or a dining table.
Parts and cutting
Twelve parts: front, back, two sides, base, one 340 mm cross divider, three short dividers for the front row and three slightly taller ones for the back row. Keep the two sets apart after cutting. The 3 mm layout is 1316 × 302 mm, so most hobby lasers will need it split over two or three sheets.
Time estimate for the 3 mm file: about 26 min 22 s on a 10 W diode, about 10 min 59 s on a 40 W CO2 and about 5 min 16 s on a 100 W CO2. With 5 or 6 mm plywood on a diode, budget several passes per part.
Thickness and finish
Four mm plywood is plenty for eight single items. Choose 6 mm for a restaurant version that will be handled all day. Seal with a hard wax oil, which resists greasy fingers better than bare wood.
For selling, this station suits pizza places, barbecue joints and home bar carts, and it is a good upsell next to a smaller caddy.
Questions about this file
What size items fit each cell?
Each cell is roughly 80 mm wide, which suits one round bottle up to about 75 mm across, or one shaker or small jar.
Why is it only 90 mm tall?
The lower walls keep the station compact for tables; the back wall still steadies 250 ml bottles.
Can I cut it from 3 mm MDF?
Yes, use the 3 mm file. MDF is stiff but not water resistant, so seal it fully before kitchen use.
Is glue required?
No. With twelve interlocking parts the box is rigid once assembled; glue the base if you want it permanent.
Can I scale it for bigger bottles?
Scale the outline up, then reset every slot to your material thickness, because scaled slots will no longer fit the tabs.
Similar files
