VisualizationLong Makeup Vanity Organizer SVG, Six Cell Countertop Cosmetic Box Laser File, Wide Brush and Palette Organizer DXF
A free download for a long makeup vanity organizer, 380 × 160 × 90 mm (14.96 × 6.30 × 3.54 in), the longest box in this set, with six cells: two full-depth bays at the ends and four small cells in the middle. It has 10 plywood parts with tab-and-slot joints, a 90 mm back sloping to a 50 mm front, and SVG and DXF cut files for 3, 4, 5 and 6 mm plywood.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 380 × 160 × 90 mm (14.96 × 6.30 × 3.54 in)
- Parts
- 10
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,484 × 262 mm
- Cut length
- 6.86 m
- Est. time, 10 W diode (3 mm)
- 22 min 51 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 31 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Select the file, preferring 4 mm for the long walls, and test one divider slot.
- 02Cut the 380 mm base, front and back separately from the small parts to split the 1484 × 262 mm layout.
- 03Set both long dividers in the base, build the middle unit from the cross divider and two small dividers, insert it, then fit back, sides and front.
- 04Seal the box and fill the end bays with a brush cup and palettes and the middle cells with lipsticks and compacts.
Two end bays and a four-cell middle
Two long dividers split the 380 mm length into a left bay, a middle section about 17 cm wide and a right bay. The two end bays are open over the full depth: on the left a cut-glass brush cup with a powder in front of it, on the right a stack of eyeshadow palettes, as in the photo. The middle section has a short cross divider (69.6 mm) and two small dividers, giving four cells: two at the back for lipsticks and two at the front for a small palette and a blush.
Material and laser time
The long parts make for a 1484 × 262 mm layout. That will not fit most desktop beds in one piece, so cut the 380 mm base, front and back on one or two sheets and the remaining small parts on another. The 3 mm file takes about 22 min 51 s on a 10 W diode, about 9 min 31 s on a 40 W CO2 and about 4 min 34 s on a 100 W CO2. A long box benefits from stiffer sheet: 4 mm keeps the 380 mm walls straight and still cuts on a diode in a few passes.
Assembly and set ideas
Fit the two long dividers, then join the two small dividers (81.5 and 78.5 mm long) to the cross divider and drop that unit into the middle section. Add the back, sides and the 50 mm front. Glue along the long walls is optional but helps on 3 mm plywood. Finish with oil for a warm tone or lacquer near a sink.
For a set, pair it with a small two-section caddy, or sell it as a countertop organizer for a double-sink vanity where width is easy to find but depth is not.
Questions about this file
What fits in the two end bays?
Each end bay runs the full 16 cm depth, so a brush cup up to about 7 cm wide fits on one side and stacked palettes on the other.
Does the long wall bow on 3 mm plywood?
It can bend slightly over 380 mm. Glue the divider tabs or switch to 4 mm plywood for a straighter front.
Can I cut it on a bed that is 400 mm wide?
Yes, the longest parts are 380 mm, so they fit when placed lengthwise. Split the layout over several sheets.
Is acrylic an option for the middle cells?
Yes, the cross divider and small dividers can be cut from acrylic of the same thickness for a two-material look. Test the slot fit, as acrylic is less forgiving.
How do I protect it on a bathroom vanity?
Two coats of clear lacquer on all faces and the slot edges keep moisture out. Leave it to cure for a day before loading it.
Similar files
