VisualizationPantry Organizer SVG, Sloped Kitchen Storage Box Laser Cut File, Countertop Caddy DXF, Wooden Pantry Bin
This laser cut file makes a sloped pantry organizer with five sections: a wide bay, two narrow upright columns and a right column split into a back and a front pocket, for napkins, tea bags, small jars and sugar sticks. The download has SVG and DXF files for 3, 4, 5 and 6 mm plywood, an outer size of 340 × 240 × 100 mm (13.39 × 9.45 × 3.94 in) and 9 pieces joined by tabs and slots. It is a free download, with all eight files in one package.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 340 × 240 × 100 mm (13.39 × 9.45 × 3.94 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,187 × 352 mm
- Cut length
- 7.47 m
- Est. time, 10 W diode (3 mm)
- 24 min 54 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 23 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the SVG or DXF for your plywood thickness and cut a test slot on scrap so the tabs press in snugly.
- 02Cut the nine pieces: front, back, two sloped sides, base, three long dividers and one short cross divider.
- 03Assemble the walls on the base, slide in the three long dividers, then fit the cross divider into the right-hand column.
- 04Sand, apply clear lacquer or oil, and fill the wide bay with napkins, the narrow columns with tea bags and the corner pockets with jars and sugar sticks.
What fits inside
Three long dividers run front to back and make four columns of different widths. The left column is the widest and in the photo holds a stack of paper napkins lying flat. The next two are narrow and keep tea bags standing on edge, green in one and red in the other, so you can flick through them like cards. The right column has a short cross divider: two small spice jars sit in the back pocket and a bundle of sugar sticks in the front one. The front wall is 55 mm and the back 100 mm, with the sides sloping between them.
Cutting it on a hobby laser
For the 3 mm file, the cut takes about 24 min 54 s on a 10 W diode, about 10 min 23 s on a 40 W CO2 and about 4 min 59 s on a 100 W CO2. A diode cuts 3 mm in one or two passes; thicker 5–6 mm sheets need a CO2 or several passes. The 3 mm layout is 1187.4 × 352 mm, which is longer than most desktop beds, so rearrange the pieces across two or three sheets.
Finishing
Sand the edges to take off the char, then wipe on a clear lacquer or a food-safe oil so spills and sticky fingers wipe off. Glue is optional; the joints hold on their own, and a drop of wood glue makes the box permanent.
Ideas for selling: a coffee-station or tea-corner organizer for the counter, a hostess gift filled with napkins and tea, or a matched pair with a smaller box for an office kitchen.
Questions about this file
What is this pantry organizer best for?
It suits a mix of flat and upright items: napkins in the wide bay, tea bags or sachets in the narrow columns and small jars in the corner. It also works for a coffee station.
Can I scale it to fit a deeper shelf?
Yes, but after scaling set every slot back to your actual sheet thickness, or the tabs will not fit. Scaling changes the slots along with everything else.
Which thickness looks best on a counter?
Four millimeter plywood gives a solid look without much weight. Three millimeter is lighter and the fastest to cut.
Do I need to glue the joints?
No. The tabs and slots hold it together; glue is only for a permanent, extra-rigid box.
What finish suits a pantry box that never gets wet?
A thin coat of clear lacquer or a food-safe oil is enough here; it stops stains from sugar and tea without changing the color much.
Similar files
