Narrow Makeup Vanity Organizer, 5 Slots

Narrow Makeup Organizer SVG, Five Slot Long Vanity Box Laser File, Slim Shelf Cosmetic Holder DXF

A free laser cut narrow makeup vanity organizer, 360 × 120 × 100 mm (14.17 × 4.72 × 3.94 in), with five slots in a single row. Nine parts fit together with tabs and slots, and there are SVG and DXF cut files for every thickness from 3 to 6 mm (3, 4, 5, 6). The sides slope from a 100 mm back to a 60 mm front. Download is free.

Author

DXF World · 240 files

Formats

SVG, DXF

Outer size (W × D × H)

360 × 120 × 100 mm (14.17 × 4.72 × 3.94 in)

Parts

Material thickness

3, 4, 5 or 6 mm plywood (a file for each)

Layout size (3 mm file)

1,344 × 232 mm

Cut length

5.89 m

Est. time, 10 W diode (3 mm)

19 min 38 s

Est. time, 40 W CO2 (3 mm)

8 min 11 s

Layers

CUT only, no engraving

Free account required to download

How to make it

01Pick the plywood thickness and test-cut one divider slot from the file.

02Cut the 360 mm base, front and back on one sheet and the sides and four dividers on another.

03Set all four dividers into the base, add the 100 mm back, fit both sides and finish with the 60 mm front.

04Sand, seal, and stand palettes upright in the outer slots and brushes in the first one.

Long and slim for a shelf or windowsill

At only 12 cm deep, this is the slimmest organizer in the makeup set, meant for a narrow shelf, a bathroom ledge or the back edge of a dressing table. Four dividers run front to back and cut the 360 mm length into five equal slots, each roughly 7 cm wide. The photo in a dressing room shows brushes in the first slot, lipsticks in the second, a stack of compacts in the third and eyeshadow and blush palettes standing upright in the last two.

Cutting a long thin layout

Because the parts are long and short, the 3 mm layout is 1344 × 232 mm. Very few desktop machines are that long, so split it: the base, front and back (all 360 mm) on one sheet, and the sides with the four dividers on another. Cutting the 3 mm file takes about 19 min 38 s on a 10 W diode, about 8 min 11 s on a 40 W CO2 and about 3 min 56 s on a 100 W CO2. A 10 W diode cuts 3 mm in one or two passes, but 5–6 mm needs repeated passes.

Assembly and ideas

Stand the four dividers in the base, push the back on, then the two sides and the 60 mm front. The long front and back can bow slightly on 3 mm stock, so 4 mm or a drop of glue at each divider helps.

Ideas for this slim format:

A makeup shelf organizer for a small apartment bathroom
A pen and marker holder for a craft room
A long gift box for a skincare or lip set

Questions about this file

Will it fit on a 12 cm shelf?

The outer depth is exactly 120 mm, so it sits on a 12 cm shelf with no overhang. Check the clearance above, as the back is 100 mm tall.

Do palettes fit lying flat?

Only small ones. The slots are about 7 cm wide, so most palettes stand on edge, which also saves space.

Should I choose 3 mm or 4 mm for such a long box?

4 mm keeps the 360 mm front and back straighter. If you use 3 mm, glue the divider tabs to stop the walls from bowing.

Can I cut it from 3 mm acrylic?

Yes, with the 3 mm file and a slot test first. Clear or mirror acrylic looks good on a bathroom shelf and does not mind water.

How do I keep the long walls from warping in a humid bathroom?

Seal both faces of every part, not just the outside, so moisture enters evenly. Hardwax oil or water-based polyurethane both work on birch.