VisualizationCartoon Tree SVG, Round Crown Oak Tree Laser Cut File DXF, Family Tree Gift Tag and Earth Day Hanging Decoration
A friendly, year-round tree ornament: a big three-lobed crown like a cloud, a trunk that flares at the base and a wide low mound of ground, all fill-engraved, with three wavy bark lines left as bare wood. The smooth outline has no thin parts. Overall size is 90 × 111.6 mm, or 3.54 × 4.4 in, and the 4 mm hanging hole is at the top of the crown.
- Formats
- SVG, DXF
- Size
- 90 × 112 mm (3.54 × 4.40 in)
- Parts
- 1
- Hanging hole
- 4 mm
- Cut length
- 0.46 m
- Engraving area
- 38.8 cm²
- Material
- 3 mm plywood, MDF or acrylic
- Est. time, 10 W diode
- 7 min 59 s
- Est. time, 40 W CO2
- 2 min 47 s
- Est. time, 100 W CO2
- 1 min 55 s
- Per 300 × 400 mm sheet
- 9 pcs
- Per 600 × 400 mm sheet
- 18 pcs
- Layers
- CUT (red), ENGRAVE (black)
- License
- CC0 1.0: free for personal and commercial use
Free account required to download
How to make it
- 01Import the tree at 90 mm wide. If you plan to paint the crown in seasonal colours, tape the board first.
- 02Run a fill-engraving test on scrap and make sure the three wavy bark lines stay open as light slivers.
- 03Engrave the crown, trunk and ground, then cut the smooth outline, which needs no special care.
- 04Paint the crown for the season you are selling to, and hang the tree from the top of its crown.
Not a Christmas tree, and that is the point
This is the tree a child draws: a fluffy round crown, a sturdy trunk and a patch of ground. It is not tied to December, so it sells in spring, at harvest time and for family events as easily as at Christmas. The crown, trunk and ground are solid dark engraving. Three thin wavy lines run up the trunk and fade into the crown as bare wood, giving the bark some movement, and a plain border follows the smooth outline.
A big fill on a simple cut
The outline is about as easy as it gets: smooth curves, no thin bridges, nothing to snap. The time goes into the engraving, because almost the whole face is filled. Plan for about 7 min 59 s per tree using a 10 W diode and 2 min 47 s using a 40 W CO2, based on 3 mm plywood. The bark lines are thin slivers of bare wood, so a too-coarse line interval can close them up; test before batching.
Painting it for the seasons
Engrave through masking tape and the crown takes paint beautifully: bright green for spring, orange and red for autumn, pink dots for blossom, white for a snowy version. The trunk can stay natural brown, since the engraving already reads as bark.
Gift ideas around trees and families
- Family tree gifts: engrave surnames or children's names on the back, one tree per household.
- Earth Day and tree-planting events, handed out to volunteers.
- Teachers' gifts with "Thank you for helping me grow" on the reverse.
- Arborists, gardeners and garden centres, as a shop token or customer thank-you.
Questions about this file
Is this a Christmas ornament?
It can hang on a Christmas tree, but it is a general tree shape that works year-round for spring, autumn, family and nature themes.
Can I use it as a family tree gift?
Yes. Engrave family names on the back, or leave the crown unengraved and write names across it for a simple family tree keepsake.
Why are the bark lines closing up in my engraving?
They are narrow slivers of bare wood. Use a finer line interval or a slightly lower power so the laser does not burn into them.
How do I paint it for autumn?
Engrave through masking tape, dab orange, red and yellow on the crown with a sponge, then peel the tape for a clean border.
How many trees fit on a 600 × 400 mm sheet?
Eighteen with simple spacing, or nine on a 300 × 400 mm sheet.
Similar files
