VisualizationReindeer Ornament SVG, Cute Standing Deer Outline Laser Cut File DXF, Baby First Christmas Name Keepsake
A cute cartoon reindeer standing in profile with a long neck, rounded antlers, a little ring for a tail and two long legs. A single thin engraved line runs just inside the cut edge, like stitching, and the body is otherwise bare wood. The reindeer is 124.2 mm tall and 90 mm wide (4.89 × 3.54 in), hangs from a 4 mm hole over its antlers, and is the fastest ornament in this group to make.
- Formats
- SVG, DXF
- Size
- 90 × 124 mm (3.54 × 4.89 in)
- Parts
- 1
- Hanging hole
- 4 mm
- Cut length
- 0.47 m
- Engraving area
- 1.4 cm²
- Material
- 3 mm plywood, MDF or acrylic
- Est. time, 10 W diode
- 1 min 48 s
- Est. time, 40 W CO2
- 44 s
- Est. time, 100 W CO2
- 22 s
- Per 300 × 400 mm sheet
- 9 pcs
- Per 600 × 400 mm sheet
- 18 pcs
- Layers
- CUT (red), ENGRAVE (black)
- License
- CC0 1.0: free for personal and commercial use
Free account required to download
How to make it
- 01Import the reindeer at 90 mm wide and, if you are personalising, type the name inside the stitch line on its own layer.
- 02Engrave the single border line with a light, quick setting; it only needs to show, not to be deep.
- 03Cut the outline at a steady speed so the small antler curves stay rounded.
- 04Paint a red nose or leave it plain, then hang the reindeer from the loop above its antlers.
Soft, simple and very fast
This reindeer is all curves: a long swan-like neck, a rounded snout, stubby branched antlers and two long legs ending in rounded hooves. Its tail is a little engraved ring on a round bump. The only engraving is one thin line that follows the outline about 3 mm inside the edge, so the piece looks finished without any fill.
That makes it quick. Estimated times in 3 mm plywood are tiny: 1 min 48 s by 10 W diode, 44 s by 40 W CO2, 22 s by 100 W CO2. If you sell at markets and need a volume item, this is it.
The big plain body
Inside the stitch line, the neck and body are clean wood. That space suits a baby's name and year, a short word like "Joy", or a painted face and red nose added by hand. Add text on its own engrave layer and keep it inside the line.
Cutting notes
The legs are long but wide, and the gap between them is a smooth arch, so nothing is fragile. The antler tips are the smallest curves; a slow, steady cut keeps them round. MDF, plywood and 3 mm acrylic all work.
Who buys it
- New parents: "Baby's first Christmas" with a name and year on the body.
- Market stalls that want a low-cost, high-volume ornament.
- Paint parties, since the plain body is a blank canvas for children.
- Family sets: one reindeer per child, each with its own name.
Questions about this file
Can I write a baby's name on it?
Yes. The body inside the engraved line is plain wood, with room for a name and a year. Add it as text on a separate engrave layer.
Why is it so quick to make?
There is no fill engraving, only one thin line inside the edge. Most of the time is the cut itself.
Are the legs strong?
They are long but wide, with a smooth arch between them, so they hold up well in 3 mm plywood and acrylic.
Can kids paint it?
It is a good choice for that: the body is an open space, and the engraved line acts as a guide for staying inside the edge.
How many reindeer can I cut from a 300 × 400 mm sheet?
Nine with standard spacing; the larger 600 × 400 mm sheet takes 18.
Similar files
