VisualizationDeep Makeup Organizer SVG, Five Section Cosmetic Storage Laser File, Wide Back Bay Vanity Box DXF
A free download for a deep makeup organizer, 320 × 220 × 90 mm (12.60 × 8.66 × 3.54 in), with five sections: two wide bays at the back and three smaller cells at the front. The 9 plywood parts lock together with tabs and slots, the sides slope from 90 mm to a 50 mm front, and there are SVG and DXF files for each of 3, 4, 5 and 6 mm plywood.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 320 × 220 × 90 mm (12.60 × 8.66 × 3.54 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,100 × 322 mm
- Cut length
- 6.60 m
- Est. time, 10 W diode (3 mm)
- 22 min 00 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 10 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the file for your plywood and test the fit of a front-cell divider in a scrap slot.
- 02Cut the base alone if needed, then the walls, cross divider and three short dividers from the 1100 × 322 mm layout.
- 03Attach the back divider and both front dividers to the cross divider, set it in the base and add back, sides and front.
- 04Sand, seal, and lay brushes flat in one back bay with palettes in the other.
Wide bays at the back, small cells in front
At 22 cm this is one of the deepest boxes in the makeup set. A cross divider 69.7 mm tall runs the full 320 mm, and the space behind it is split into just two wide bays, each about 15 cm across. That is enough for brushes to lie flat instead of standing in a cup, which suits people who store brushes horizontally to keep the bristles dry. The second back bay takes eyeshadow palettes leaning against the back. In front of the cross divider two short dividers make three cells for a powder, lipsticks and a blush with a cream compact, as on the marble counter in the photo.
Cutting and assembly
The parts nest on 1100 × 322 mm. The 320 × 220 mm base is the biggest piece, so on a compact laser cut it alone and put the walls and dividers on another sheet. For the 3 mm file allow about 22 min 00 s on a 10 W diode, about 9 min 10 s on a 40 W CO2 and about 4 min 24 s on a 100 W CO2.
Join the single back divider (90 mm tall) and the two front dividers (69.7 mm) to the cross divider, lower it into the base, then fit the back, sides and the 50 mm front. No glue is needed for home use.
Finishing and gift ideas
Sand the long edges of the bays, which your hands touch most, and seal with oil or lacquer. A felt or cork liner cut to fit the brush bay protects bristles. Gift it with a brush set laid in the back bay, or offer it as a makeup artist's brush-drying box.
Questions about this file
Can brushes really lie flat in the back bay?
Each back bay is about 15 cm wide and roughly 10 cm deep, so eye brushes lie flat and longer face brushes fit diagonally.
Why only two cells at the back?
Wide back bays leave room for flat brushes and large palettes, while the three front cells handle small items like lipsticks and compacts.
Will 4 mm plywood work on my diode?
Usually yes, in two or three passes on a 10 W diode. Test the slot fit first, because thicker plywood varies more in real thickness.
How do I line the brush bay?
Cut a piece of felt or thin cork to the bay size and glue it to the base before assembly, or just drop it in loose.
Can I engrave the brush bay floor?
Yes, engrave the base before assembly with a pattern or a name. The file includes cut lines only, so add your own engraving layer.
Similar files
