VisualizationBaking Packet Organizer SVG, Sachet Sorter with Tool Compartment Laser Cut File, Baking Mix Holder DXF
A baking packet sorter with three narrow full-depth slots that hold sachets upright like files, plus a wider bay split into a back section for sprinkle jars and a front section for measuring spoons and pastry brushes, five compartments in total. The download has SVG and DXF files for 3, 4, 5 and 6 mm plywood; it measures 300 × 220 × 90 mm (11.81 × 8.66 × 3.54 in), is cut from 9 pieces with a front sloping down to 45 mm, and joins with tabs and slots. Free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 300 × 220 × 90 mm (11.81 × 8.66 × 3.54 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,118 × 322 mm
- Cut length
- 6.94 m
- Est. time, 10 W diode (3 mm)
- 23 min 08 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 38 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Open the file for your plywood thickness and cut one slot as a test before the full job.
- 02Cut all nine parts; the three full-depth dividers are identical and the short cross divider belongs in the wide bay.
- 03Assemble base, back, sides and front, slide in the three long dividers, then fit the short cross divider into the wide left bay.
- 04Sand, lacquer, then stand sachets upright in the narrow slots and put jars and spoons in the wide bay.
Sachets filed like index cards
The right side of this box is a sorter: three narrow slots run the full 220 mm depth, and each holds a long row of sachets standing on edge. In the photo they hold baking powder, vanilla sugar and packets of sprinkles, roughly fifteen of each. The low 45 mm front lets you flick through the row with one finger and read every sachet.
The left side is wider, about 134 mm, and a short cross divider splits it in two. The back part holds two tall sprinkle jars; the front part takes measuring spoons, with two silicone pastry brushes leaning in it as well.
Parts and laser time
There are 9 parts: front, back, two sides, base, three full-depth dividers and one short cross divider for the wide bay. All three long dividers are the same 220 × 90 mm size, so their order does not matter.
The 3 mm layout is 1118.2 × 322 mm (each thickness differs slightly). On a bed shorter than that, cut it in two or three runs. Time for the 3 mm file is about 23 min 08 s on a 10 W diode, about 9 min 38 s on a 40 W CO2 and about 4 min 38 s on a 100 W CO2. For 5 and 6 mm a diode needs several passes.
Thickness and finishing
The narrow slots are where thickness shows. Thin 3 mm dividers leave a little more room for sachets; 6 mm makes each slot narrower. Choose 3 or 4 mm if you store many packets.
Seal the box with clear lacquer so flour dust wipes off. For selling, pitch it to bakers who buy cake mixes and flavorings in bulk, or add a set of packets as a ready-to-gift bundle.
Questions about this file
How many sachets fit per slot?
Each narrow slot is roughly 45 mm wide and over 200 mm long inside, enough for 15 to 20 standard baking sachets standing up.
Why do the slots run the full depth?
Full-depth slots work like a file box, so packets stand in one long row and you can flip through them from the low front.
Which thickness leaves the most room?
3 mm plywood gives the widest slots; the 6 mm file is sturdier but each slot loses a few millimetres.
Can I use it for tea or seasoning packets?
Yes, any flat packet that stands on edge works, from hot cocoa sachets to gravy mixes.
Does it fit inside a pantry cabinet?
At 90 mm tall and 220 mm deep, it fits most pantry shelves, and the low front lets you read the sachets without pulling the box out.
Similar files
