VisualizationBunny Christmas Ornament SVG, Peeking Rabbit in Santa Hat Laser Cut File, Pet Rabbit Owner Gift DXF
A cartoon rabbit peeking up over an oval ledge, as if popping out of a burrow, wearing a floppy Santa hat with a pompom. Big round eyes look upward, long whiskers fan out from a light muzzle with two buck teeth, and one ear stands up on the right. Dimensions are 90 × 94.9 mm (3.54 × 3.74 in), and the hat tip holds a 4 mm hole for hanging.
- Formats
- SVG, DXF
- Size
- 90 × 95 mm (3.54 × 3.74 in)
- Parts
- 1
- Hanging hole
- 4 mm
- Cut length
- 0.37 m
- Engraving area
- 22.7 cm²
- Material
- 3 mm plywood, MDF or acrylic
- Est. time, 10 W diode
- 5 min 01 s
- Est. time, 40 W CO2
- 1 min 46 s
- Est. time, 100 W CO2
- 1 min 12 s
- Per 300 × 400 mm sheet
- 12 pcs
- Per 600 × 400 mm sheet
- 24 pcs
- Layers
- CUT (red), ENGRAVE (black)
- License
- CC0 1.0: free for personal and commercial use
Free account required to download
How to make it
- 01Import the bunny at 90 mm wide and zoom in on the whiskers to see how thin the engraved lines are.
- 02Test the engraving on scrap so the whiskers come out as fine dark lines, not thick strokes or broken dashes.
- 03Engrave the head, hat and ledge, then cut the outline, which bulges out around the whisker tips.
- 04Paint the hat red or the fur to match a real pet, and hang it from the tip of the Santa hat.
Peeking out of the burrow
This rabbit has just popped its head up to see what is going on. Its round eyes look upward, a light muzzle with two buck teeth rests on the edge of a dark oval, and a long fan of whiskers spreads to both sides. The Santa hat sits slightly crooked, with its point standing up and its tail flopping left into a fluffy pompom, while the right ear pokes out from under the brim.
Fine whiskers on a light muzzle
The whiskers are the detail to protect. They are thin engraved lines with tiny dots at their roots, sitting on the bare muzzle, and the cut outline bulges out to give them room. If your engraving is too heavy they turn into thick strokes; if too light they vanish. Try one test piece and look at them closely. The rest is straightforward fill on the head and hat. Budget roughly 5 min 1 s for each bunny on a 10 W diode in 3 mm plywood; a 100 W CO2 tube gets it done in 1 min 12 s.
Painting the bunny
Leave the head natural brown, or paint it grey or white for a specific breed. Red on the hat with the trim left bare makes it festive. The oval is a nice place for a pet's name if you leave it unengraved.
For rabbit people
- Pet rabbit owners: personalise it with the rabbit's name on the ledge.
- Rabbit rescues and shelters, as a fundraiser ornament.
- Easter-to-Christmas sellers: the same bunny sells to buyers who already love rabbit decor.
- Kids who keep a bunny, as a stocking filler.
Questions about this file
Will the whiskers show if I make it smaller?
Down to about 70 mm wide they still show as separate lines. Smaller than that, they start to merge into the muzzle.
Can I put my rabbit's name on it?
Yes. Turn off the fill on the oval ledge and engrave the name inside it, or engrave it on the back.
Is the pompom sturdy?
The pompom has a 3 mm wooden margin around it and is joined to the hat by a wide neck, so it is firm in plywood.
Does it pair with other peeking animals?
It matches the peeking fawn in the same style, and the two make a sweet woodland set.
Can I paint it to look like my rabbit?
Yes. Engrave lightly, paint the head in your rabbit's colours, and leave the eyes and muzzle natural for contrast.
Similar files
