VisualizationGingerbread Man Ornament SVG, Light Bulb Dot Gingerbread Laser Cut File, Personalized Kids Name Christmas Tag DXF
A tall gingerbread man drawn like the lit figures on Christmas street poles: his whole outline is a chain of big round dots, with smaller dots for the eyes, smile, bow tie and two buttons. The cut edge scallops around each bulb, and the belly is left as a wide blank area for a name. He stands 141.5 mm tall and 95 mm wide (5.57 × 3.74 in), hanging from a 4 mm hole above his head.
- Formats
- SVG, DXF
- Size
- 95 × 142 mm (3.74 × 5.57 in)
- Parts
- 1
- Hanging hole
- 4 mm
- Cut length
- 0.50 m
- Engraving area
- 15.3 cm²
- Material
- 3 mm plywood, MDF or acrylic
- Est. time, 10 W diode
- 4 min 12 s
- Est. time, 40 W CO2
- 1 min 32 s
- Est. time, 100 W CO2
- 58 s
- Per 300 × 400 mm sheet
- 6 pcs
- Per 600 × 400 mm sheet
- 12 pcs
- Layers
- CUT (red), ENGRAVE (black)
- License
- CC0 1.0: free for personal and commercial use
Free account required to download
How to make it
- 01Import the gingerbread man at 95 mm wide and add any name or message on a separate engrave layer across his belly.
- 02Engrave the bulbs first. If dots look doubled or smeared, calibrate your scanning offset and try again on scrap.
- 03Cut the scalloped outline; the many small arcs take a little longer than a smooth edge.
- 04Let kids paint each bulb a different colour, or leave them brown, and hang the figure from the loop above his head.
Lit up like a street decoration
Think of the light-up figures cities hang on lampposts in December. This gingerbread man is drawn the same way: no outline at all, just a row of round bulbs tracing his head, arms and legs. Two small dots make the eyes, four more form a smile, a cluster of five sits at the neck like a bow tie, and two buttons run down his tummy. Around the bulbs, the wooden edge bulges in soft scallops, a bit like icing piped round a biscuit.
A big blank belly
Between the buttons and the legs there is a lot of plain wood. That makes this one of the easiest designs to personalise: a child's name, "Baker of the Year", a date or a short message all fit across the body. Set the text on its own engrave layer and preview it before cutting.
Dots, dots and more dots
Each bulb is a small solid fill, so the head jumps from dot to dot. On a diode that travel adds up: a 10 W diode is estimated at 4 min 12 s per gingerbread man in 3 mm plywood, compared with 58 s for a 100 W CO2. Bidirectional scanning can leave dots slightly offset if your machine needs calibration; a quick test shows it. The figure is large, so only six fit across a 300 × 400 mm sheet.
Who loves it
- Kids' name ornaments for school fairs and Christmas markets.
- Bakeries and cookie decorators, as a shop decoration or a thank-you for regulars.
- Painting parties: children colour each bulb a different light colour.
- Family sets: one gingerbread per family member, each with a name.
Questions about this file
How long a name fits on the belly?
At the original 95 mm width, a typical first name fits comfortably on one line between the buttons and the legs. Longer text can go on two lines.
Can children paint the light bulbs?
Yes, it is great for that. The dots are clear targets for a small brush or paint pen, and the wooden edge is sanded smooth with very little effort.
Why do my engraved dots look doubled?
That is usually scanning offset on bidirectional engraving. Calibrate it in your laser software or switch to one-direction engraving for this file.
Can I make it smaller for gift tags?
Down to about 70 mm wide it still looks good. Below that the small face dots begin to merge.
Is it only for Christmas?
The light-bulb style is Christmas-y, but bakeries and baking clubs use it all year as a cookie-themed sign or keepsake.
Similar files
