VisualizationCartoon Cat SVG, Grooming Kitty Laser Cut Ornament DXF, Funny Cat Lover Gift Tag, Kids Room Wall Decor
A sitting cartoon cat caught mid-wash, eyes squeezed shut and tongue on a lifted paw, drawn in bold, brushy lines. Most of the body is bare wood, so it is easy to colour in or personalise. Size: 90 × 126.1 mm, or 3.54 × 4.97 in, with the 4 mm hole above the right ear tip.
- Formats
- SVG, DXF
- Size
- 90 × 126 mm (3.54 × 4.97 in)
- Parts
- 1
- Hanging hole
- 4 mm
- Cut length
- 0.44 m
- Engraving area
- 12.8 cm²
- Material
- 3 mm plywood, MDF or acrylic
- Est. time, 10 W diode
- 3 min 36 s
- Est. time, 40 W CO2
- 1 min 19 s
- Est. time, 100 W CO2
- 50 s
- Per 300 × 400 mm sheet
- 9 pcs
- Per 600 × 400 mm sheet
- 18 pcs
- Layers
- CUT (red), ENGRAVE (black)
- License
- CC0 1.0: free for personal and commercial use
Free account required to download
How to make it
- 01Bring the file into your laser program and check that it reads 90 mm across and 126.1 mm from the hanging loop to the paws.
- 02Engrave the dark outlines as a scan fill; they are thick strokes, so line mode would only trace their edges.
- 03Cut one test piece and look at the ear tips and the inside of the tail curl before running a full sheet.
- 04Sand, then colour the bare areas with markers or paint, or leave them natural and hang the cat by its ear loop.
Bath time, cartoon style
This cat sits upright with its tail curled round at the bottom right and its head bent down to a raised front paw. The eyes are closed in a pleased squint, a small tongue touches the paw, and tufts of fur stick out at the cheeks and behind the neck. The ears are tall and pointed, with a little nick in the right one. Lines are thick and slightly ragged, like a brush drawing, and almost everything inside them is plain wood, so the piece looks like a colouring-book page made of plywood.
Points to check before a batch
The narrowest spots are the ear tips and the curl of the tail, where the outline turns back on itself. If the tail curl chars, lower the power a touch or turn on air assist. The engraving is all strokes rather than big fills, so it finishes fast. Our estimate for 3 mm plywood is 3 min 36 s when a 10 W diode does the work, 1 min 19 s for a 40 W CO2 and only 50 s at 100 W. Light birch shows the brushy lines best, and on white acrylic the dark outlines look like a printed cartoon.
Selling ideas for cat people
- Personalised pet tag for a gift basket: write the cat's name on the bare belly with a paint pen.
- Kids' room wall hanging or a paint-it-yourself craft kit, since the open areas are ready for markers.
- Thank-you gift for a groomer or a vet clinic; the washing pose fits a grooming salon perfectly.
- Funny add-on for a cat-themed birthday, sold in pairs with a card.
Questions about this file
Can kids colour this cat after cutting?
Yes, that is one of its best uses. The inside of the cat is plain wood framed by thick lines, so markers or acrylic paint stay inside the shapes easily. Sand the edges smooth first so small hands do not catch splinters.
Where does the name go if I personalise it?
The belly and the raised thigh are the largest blank areas. Add a short name there as a separate engrave layer, or write it with a paint pen after cutting.
Will the tail curl survive in thin material?
At full size the tail is wide enough for 3 mm plywood. If you scale the cat down a lot, check the inner curve of the tail, because that is where the gap becomes narrowest.
Is the tall shape a problem on a small tree?
It is 126.1 mm tall, so it hangs best on a medium or large tree, a door knob or a wall hook. For small trees, scale it down slightly and test the ear tips.
Can I sell painted cats made from this file?
Yes. Sell the cut cats painted or plain, and include them in kits or bundles without crediting anyone.
Similar files
